Entry Level Flux Core Titanium 125 Welder Review


  • Input Voltage: 120
  • Wire Feed Speed: 60 – 200 Inches Per Minute
  • AC Volts: 120
  • Accessories Included: Flux-cored wire, 0.030 in. contact tips, 150A FCAW Gun, 6ft., gas-less nozzle
  • Amperage (amps): 30A-125A
  • Duty cycle: 90A @ 30%
  • Maximum amperage output (amps): 125A
  • Minimum amperage output (amps): 30A
  • Open Circuit Voltage:6V
  • Power cord (ft.): 8 ft.
  • Product Weight: 15 lbs.
  • Weldable Metals: Mild steel, low alloy steel (not suitable for aluminum or stainless steel)
  • Welding capacities: 18 gauge to 3/16 in. thick (0.047 in. – 0.187 in.) steel


If you want a flux-core welder for your DIY project or light-duty metal shop, the Titanium 125A will be an ideal option. You can get to experience an above-average wire feed speed, inverter technology with smooth DC output, stable arc, decent amperage, and so on. The standard is higher than most other cheap entry-level flux core welders.

This machine is quite easy to use, and the instructions are written under the hood, which is quite user-friendly. However, if you are up for heavy-duty industrial tasks, you should look for other options Like LOTOS MIG 140 amp or GoPlus MIG 130. Since it is a flux core welder, it will not offer super clean finishes, but the joint is quite sturdy.

πŸ‘ Pros:
  • Easy user-interface
  • Portable and efficient for the inverter technology 
  • Continuous wire feed speed control for optimal welding performance
  • Ensures stable arc and cleaner welds
  • The perfect welder for outdoor use and on dirty metals
  • Great DC output
  • Variable control for the fine-tuned welding 
  •  Trigger activated gun prevents accidental arc flash
  • Good root penetration 
  • The shielding gas is not required
  • Built-in overload protection to prevent overheating
πŸ‘Ž Cons:
  • The wire gun is not well-built
  • Not for heavy-duty task

Features and Description

Flux Core Arc Welding, also known as β€˜self-shielded welding,’ is gaining popularity for the welding of dirty and rusty steel. You may encounter splatter, but this is a common disadvantage of flux-core welding. With Titanium Easy-Flux 125Amps, you will face less amount of splatter with great finish.

This tool is an ideal option for novices who have recently started welding and want to level up without spending a lot. For less than 400 bucks, you can get almost all the necessary aspects. The portable and lightweight design, strap included, and easy user interface – all of these traits have made it an incredible choice for beginners. However, experts may not recommend this one for heavy-duty industrial jobs. It is suitable up to 3/16” mild metals.

Included Accessories

Right off the bat, if we look at the accessories that the manufacturer includes in this package – strap for carrying the machine, shielded wire, manual, additional contact tips, and tip covers, ground clamp, 150A MIG gun, and power cord. However, the ground clamp is light-duty, and you may have to change it. The ground clamp and the MIG gun have a length of around 6 Β½ feet. And the power cord length is approximately 8 feet. However, the wire gun is not well-built as it is made out of plastic. But what can you expect more in this price tag?


Talking about this green tool, it is 120V AC-powered machine. You will require a 20amp circuit to operate the welder at maximum output.

The output amperage range will let you identify the minimum and maximum thickness of the weldable material and thus tells you about the capability.

The output amperage range is around 30A to 125A. The output amperage range will let you identify the minimum and maximum thickness of the weldable material and thus tells you about the capability.

A specific duty cycle value indicates how long it would operate at the given output. Its duty cycle is 30% at 90A. The machine has a 30% duty cycle at 90A which means the tool can run 3 minutes, providing 90 amp output. Since duty cycles are calculated at 10 minutes intervals, 30% means 3 minutes.

The device would automatically get shut down after the time limit to cool the components.

The open-circuit voltage is 21.60V. This model comes with 4” 2Ib spool wire capacity. The wire feed speed is from 60 to 200IPM. Though the speed is not like the high-end ones, it can serve you well for home-use tasks. It claims that it can weld from 18 gauges to 3/16” mild steel. But the great thing is it can also weld ¼” metal in a single pass if you chamfer the edges. However, this one is not recommended for aluminum or stainless steel. You can get a clean welding bead for mild steel.

If you look under the hood, there is a chart for metal thickness, amperage range, and wire speed. Suppose if you want to weld 1/8”, you have to start off the voltage set at F.5 and a wire speed of 6.

Inverter Technology

It uses an inverter technology with smooth DC output with a stable arc. This inverter technology offers smooth finishes and ensures a constant power output so that the weld doesn’t look messy. Additionally, the inverter welder weighs relatively less than the transformer-based welder with offering similar production. This machine is only around 15Ib, which makes it incredibly portable.


Since this model is going to be used by the novices, the manual is written in an organized way. Check out the last few pages for some great advice and tips. You will also find some terminologies or techniques on how you hold your flux gun with respect to your welding material.

If you see under the hood, there are 0.03 and 0.035 grooves. This tool comes with a 1Ib of EF1T-GS 0.03” wire. Here is a thing to mention that the leads are not replaceable.

Suggestion– Make sure that the tip matches the diameter of the wire.

One of my favorite aspects is the cold start wire feed button. It offers a smooth feeding process. So, you can put concentrate on the job, not on the machine. The thermal overload protection ensures the durability of your device and provides a dependable performance.

How to Use Titanium 125 Welder?

Now, are you wondering how you are going to use this flux-core welder? Let’s learn the detail down below:

  • Firstly, go through the instruction manual to get a thorough idea about the parts and process.
  • Plug the welder into an outlet
  • Open the hood by pressing a button on the top-front part of the welder.
  • A spool of flux core wire comes with the package. Now, open the hood,
  • Flip a lever and loosen a thumbscrew to feed the wire
  • insert the reel in its distinguished place. Then, tighten the screw after putting it down.
  • Read the manual to pass it through the feeding system.
  • Lastly, switch on the machine, press the trigger, and after a few moments, the wire will be coming out of the gun. Put the tip back, and you are ready to weld.
  • You can see a chart under the hood or wire spool door which denotes the metal thickness, the wire speed, and the amperage. There is a dial for amperage and a dial for wire speed.

Most importantly, you will need to wear gloves, a welding helmet, and other protective gear.

Tip – Generally, flux-cored welding needs a stick out of around 3/4 inches, which is about twice the required stick out for MIG welding.


After going through the Titanium 125 welder review, I am quite sure you are aiming at it for having hassle-free welding projects. This little bombshell is definitely an excellent value for the money. This offers a smooth finish quite effortlessly. Lastly, knowing the cost will help you to make the final decision.

Some consumers were confused between the Chicago 125Amp welder vs Titanium 125 Amp welder. Both have some similarities and dissimilarities. Let me know which one is your favorite!

So, are you looking for more flux-core welders for hobbyists? Let me know in the comment section below!


Total Score


Outdoor usability, low price-tag, portability, fidality, and safety features make the Titanium 125 welding machine perfect for novices.

Capability:            8.5
Operability:          9.7
Portability:           9.8
Overall Quality:    8.5
Price:                    9.5